How to connect and "Receive" a new project file from an RC9 controller

Overview

Any time you need to send/receive changes to the RC9 robot program or parameters.

Tools and Parts Needed

PC with Wincaps III (latest version recommended - must be Windows 10 OS or higher) and an ethernet cable

Note:
If you are not sure which part number you need or the Robot Arm you own please stop and contact your DENSO Robotics sales representative.

Step by Step Guide

Step 1	Connect the ethernet cable to your PC and to the RC9 controller's LAN port (programming port)
Step 2	Open Wincaps III on your PC -> File -> New Project -> "Get information from the controller for creating a new project -> Next
Step 3	Select the name you want to call the project and the folder you want to save it in and click "Next"
Step 4	Enter the IP address of the robot (if it has been changed from the default) - Default IP address is 192.168.0.1 (PC must be on the same sub network  "192.168.0.XX" to communicate
Step 5	Select "Receive data from the controller" -> Finish
Step 6	The project will automatically save once transfer is complete. It is recommended to always keep a backup copy of the original project file that comes with your robot (also a backup copy of the project you are currently running).