What happens to the arm odometer after an arm swap out with an RC7M?

The arm odometer doesn't reset automatically after you swap a new arm into an existing controller.  If the previous odometer data is needed, then the project backup will need to be loaded into the controller.

To access the RC7M odometer: 

            Set >> Maint >> Total h.

Step 1 On the top screen of the teach pendant, press [F6 Set]. The Settings (Main) window appears.
Step 2 Press [F6 Maint.] in the Settings (Main) window. The Maintenance menu appears.
Step 3 Press [F1 Total h.] in the Maintenance menu.

Related Links: 

• WinCAPS III Creating RC7/8 Backup